Welcome to the Protege Garage Forum - Your Mazda Authority - Now Carrying more than 800 performance parts!
As direct wholesale distributors of Fidanza and Spec, we are poised to offer the best clutch and flywheel combinations for your Mazda or Mazdaspeed vehicle! Save time and money by doing both your clutch and flywheel today. You'll be freeing up unsprung weight, increasing acceleration and...
We had one of these going a while back and I closed it at the time because of time and space constraints. These are no longer issues so I'm opening it back up to start on new quotes for our loyal customers. We've got combined over ten years of Mazda specific aftermarket and dealer experience as...
Here it is, the step by step break down for how to install our FMIC kit for the Mazdaspeed3. Thanks to Justin (TheDoc) and Jeff C for the use of their vehicles in this endeavour. What I'll do here is attach the pictures and for each post go from 1 through 5, left to write. I've circled the...
quite a bit actually :D - automated order processing. no more manual card entry and no more downtime waiting for 'pending' orders to be 'processed' - full SSL website security. this was a big complaint about our old site and rightfully so. - three secure checkout options. google, paypal...
Protege Garage is your source for quality forged internals for any modern Mazda. We have proven materials and expertise for every application from high boost turbocharged applications to all motor natural aspiration. Higher compression and lower compression pistons, as well as stronger stock...
You'll find me there under Ken Miller, Protegegarage@gmail.com. Looking forward to being your friend :) or use this URL :: http://www.facebook.com/profile.php?id=100000336890534
The attachment shows it all. Keep in mind we had fuel pulled for all these runs and had the ability to add more fuel back in for a little more boost. just to recap the mods on this car; XEDE Engine Management System GT3071R Turbocharger from ATP Jason's Homemade Catback Exhaust Jason's...
In order to better serve Mazdas247 customers, I've put together a directory here of all of our contact information. Please keep in mind we are located near Chicago in the CST time zone when calling during business hours. Also, due to extremely heavy call volume, we recommend an email or private...
As with all excellently engineered parts, the better something is engineered the more likely it is that imitators and copies will arise. Both HKS and Apexi have been victim to cheap knockoffs that look, but do not perform, the way the original part does. We've sold over 400 TRZ engine mounts to...
Its official, I hate Vonage and I'm getting rid of it. People who have used it and gotten rid of it will know what I mean. I use my work cell phone for everything anyways, so I'm going to make the changes to the website, here on the forums, and have Vonage cancelled by the month's end. So,...
http://protegegarage.com/prices-drop.php
Just a word of advice for you guys modding your mazdaspeed3s and mazdaspeed6s - just because a part says that it works for a duratec or works for a 2.3 or works for an MZR, this does not mean it will work for your engine. MZR is the global designation for mazda four cylinders ranging from the 1.5...
I ordered my Prosport Boost Gauge last week and it just got hear good company to buy from, just thought maybe you guys should add a overnight shipping option too!
Hey all, The check engine light recently game on around 87k miles on my 2003 Mazda Protege DX. Is there a way I can test to see what the error code is using a paper clip setup? I've read on other Mazda models i can use a paper clip on the ground and 10 pin. I've checked all my fluid levels...
Sorry! Wrong place to post!
I am new to this forum, having just found it through Google. I have two proteges: 01 LX2.0 with pwr locks AND remote, and 02 LX with pwr locks and NO remote. Is it possible to switch whatever makes the remote for the pwr locks work from the 01 to the 02? If so, what parts would I switch and where...
You've seen them advertised elsewhere for double the price, we're now carrying them with all the bells and whistles and ready to ship. Full replacement touch screen head units featuring; - DVD movie playback - MP3, MP4 and video file playback - 800x600 LCD touchscreen interface - fully...
I'm not big into the business of selling HID kits, but I'm willing to do a group buy if people are interested. I've established a good relationship with Teenda and have been constantly impressed with the level of quality in these kits. I use them and nothing else now on my own personal vehicles...
I figured I would just start a new thread since the other one is labeled BC coilovers... I just finished up the hour long drive home which was mixed traffic and open freeway along with some city streets with potholes. My first impression is great. The car handles fantastic is much stiffer in...
Did you see that little switch blade auto knife? They got it listed on the website for only $0.17 cents and that's with free shipping! Here is a link to it http://www.liangdianup.com/inventory/400021.htm or you can go to www.liangdianup.com and go to the knives section or search the stock number...
Just ordered an air intake from PG yesterday night and find that it is already on the way. Great communication guys! Thanks Ken.
I have bought a couple of things from Protege Garage and haven't been let down once. They always have what I am looking for and for a great price! Another plus is their shipping, FREE and they ship it right away no waiting around for months to get it (spin) Overall i've had nothing but good...
The PG full intake for 200 bucks is the PG SRI and the PG TIP right? just making sure before I go ahead and buy it.
I'm adding this topic as a reference point for bozos who, like me, make the following mistake: My wife's 2002 P5 dies yesterday afternoon, so I picked up a battery and, full of confidence in the fading light - perturbed at having to remove the sway bar to make the switch - installed it backwards....
Back from Costa Rica, I started working right away so it will take me a couple days to get back on track with everything. thanks for your patience. Ok, well we finally got it done, so here is the actual GB thread for the GT Spec front strut bar brace for the proteges. Here is the link to the GI...
just wanted to ask if PG had any interest in making a kit for the cx-7. we dont have any other option than tmic (and a cp-e ms6 fmic that needs to be modified to fit our cars and is $$$$$$$$$). soooo just wanted to see what you guys think :/ (friday)
On your website you have the Mazdaspeed Accesorry Short Shifter for 04-09 Mazda 3 for $169, but there is very minimal information and no pictures for this item. Is this still available, can you provide any more information on this? Thanks! http://protegegarage.com/156-product-156.html
no OEM parts anymore?
Outstanding service, buyer communication and shipping speed, not to mention prices. PG is the first site i goto always forf any part. Turbo inlet MS3=:))) thankyou Ken
i bought a 2002 protege today with a stiff shifter otherwise working perfectly. Its a standard, the car was sitting for 5 months and now the shifter is prety stiff, its shifts fine no grining or anything its just stiff. Could it be from sitting for so long that it need greese somewhere or something...
Hey Ken, Is the BC Coilovers you sell the whole kit that includes the endlinks?? It's not listed in detail, but everywhere else I've looked them up it's listed as a kit??
So, consolidating the information from the other thread to one single post with the CORRECT info. Here's a link to Ken's video overview of the newest units. This is what you'll be getting if you order. Current Functions List: - AM/FM Radio - Audio CD - Data CD/DVD (MP3/MP4/WMA) - SD Card...
Hey Ken Was after price of Mazdaspeed front bar + ~4-5 Progress rear sway bars for Protege please :) And postage to australia of course. Wanting to get this sorted out, so members can decide. (Did email you in regards to this but didnt hear back.) Thanks Kris
Hey just wondering if the PG SRI is the same as the Cobb's. I know PG have great service and products but I had the Cobb before and was just wondering if everyone who has the PG SRI is happy with it.
I need your Ken help I installed the turbo upgrade, I been driving it for two months it feels slower and the PSI 12.9 was the max. I been looking for any loose hose or clamps but I look everything in place. Can the turbo leak air or anywhere else? I'm crazy with this help me please....
Hey there, i see protegegarage.com sells a shifter weight for the Mazdaspeed3, just wondering if the shifter weight will work for the Mazda 3 as well? Thanks! EDIT: Never mind, question answered by cali_axela! Please close/lock.
Is this product the same as the PG SRI and PG TIP but sold together and for cheaper?????
Ordered a front and rear engine mount for my mazdaspeed protege. I have to say that the entire transaction went smoothly and not once the entire time did i feel as though i had to contact them to get any information. The shipping notifications were great, packaging of the mounts were such to...
I need a set of rear 20mm bushes for the rear sway bar for the racingbeat bar.. Can you guys help me please ? the Mazda part number for these are BP7H-28-156D Street unit stock them and the AWR's for $14 but there international shipping price is just plain ridiculous... Anyway can you...
I don't know if all of you would agree but I think some company needs to develop an aluminum but just as function splash guard for the MS3. The stock plastic piece is flimsy and is prone to cracking & breaking off. The screws get rusted and don't even come off. For those who drive through harsh...
Hey everybody I think this upgrade is the best thing for our cars. I had the kit with the standard rotors. But did the upgrade to the EBC combo. What a hell of a difference. The first time I had to use the brakes I almost went through the window. Big ups !! to Ken and P.G (drive)(cool)
http://www.protegegarage.com/product_info.php?products_id=1677 We know you Mazda3 and speed3 guys have been dying for these, but the price tag has been enormous. Not any more :) The whole kit is a massive deal, but we are selling the parts individually. No dropshipping either - its all...
http://protegegarage.com/1719-aem-cold-air-intake-2010-mazda3.html
Both full length and short rams for the new 2.5 are on the way! Inquire today!
http://protegegarage.com/1718-injen-short-ram-intake-mazdaspeed3.html
Hi everyone. This is my first post. I have a 2003 Protege ES 2.0 non turbo and I just ordered a used ecu off of ebay. I have been having a random missfire problem and a friend that had a 99 Protege said she had the same problem and they replaced the ecu and it fixed it. Ok, my question is where...
Hello around 3 weeks ago i ordered the TRZ motormount and the fujita intake from your site. I've recieved the mount 2 weeks ago while the intake is still nowhere in sight. May I ask for the tracking number please.
There are currently 2 users browsing this forum. (0 members & 2 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
